SPR-C 200

FJORD AVIATION PRODUCTS SPR-C 200 Dust Cover is engineered and
designed to fit the Eaton/Carter Series (64200,64250) underwing fueling nozzle. The impact absorbing urethane dust cover is exactly the same as the Fjord Aviation Products SPR-C EXCEPT for the lanyard. This is due to the different handles of the 64200 series versus the other Eaton/Carter fueling nozzles. The lanyard does not have a cable tab for attaching—instead there is a loop that attaches to the nozzle between the black handle grip and the metal base, where the two meet.
The protection of the nose seal from damage and sealing properties, keeps external water and debris from entering the nozzle (when not in use) are the same as with the SPR-C. Bonus– if there is some fuel in the dust cover when removed then it might be time to check the nozzle for internal fuel leaks.

FEATURES: NSN: 5340-01-437-3878

UV, fuel and chemical resistant

Flame Retardant / Non-combustible with operating temps
from -20° to 200°F

Exceeds FAA and Military standards for protection & sealing

Stainless lanyard included (replacement lanyard available)

COLOR:
Black or Red

Protect the nose seal of the Eaton/Carter 64200 series underwing fueling nozzle and prevent contaminants and moisture from entering the fuel system from the fueling nozzle (when not in use) for years with the FJORD AVIATION PRODUCTS SPR-C 200 Dust Cover
(2 year warranty, lanyard not included)

See installation instructions below

 

 

 

All weather breather cap

SPR-C 200

Dust Cover for the
Eaton/Carter 64200 Series
Single Point Underwing Fueling Nozzle

 

SPR-C 200 Installation Instructions

 

  1. With a 5/16 Allen wrench, remove cap screw and
    washer inside of handle.
  1. Remove handle (handle is very tight).
  1. Slip loop over the metal stud.
  1. Replace handle, washer and cap screw.